Home Linksys Router How to Change NAT Type on Linksys Router?

How to Change NAT Type on Linksys Router?

When you are connecting to the internet via a router, your PC requires some typical IP address. IP addresses are a chain of numbers used to detect the device connected to other systems as well as internet capable device. But the main issue is that the usage of too much electronics associated with the internet. Because of this requirement of IP addresses outstands the different types of required numerical combinations. With this, Network Address Translation comes into the picture. When you are using a Linksys Router or with any similar one equipped with NAT capabilities, the router acts as a bridge between the connection and the internet.

This is done with the use of certain objects on your local network that culminates into a singular IP address. However, difficult sort of NAT settings led to certain issues. If you figure out the effective ways on how to change NAT type on Linksys Router, you can change configure the system and permit all the required applications that can connect readily with the internet.

Troubleshooting Steps to Change NAT Type on Linksys Router

Follow the troubleshooting steps below on “how to change NAT settings on Linksys router?”

Move to the Linksys Router Settings

  1. First of all, you need to ensure the router has a proper connection and after that open the preferable internet browser.
  2. Next, write the authentic address or command for the mentioned Linksys router.
  3. In the majority of the router, you will find an IP address termed as 192.168.1.1. However, it can be only the word router. If the above-mentioned IP address doesn’t work properly, you need to examine the instructions that come with your router.
  4. Actually, you will find a sticker with the information and another sticker that denotes the password for the router.
  5. If you are using Linksys, you will get the default username as “admin” and password as “password”

Moving on to the Port Forwarding Section

  1. When you log in, check the Port Forwarding present on the left-hand side of the screen.
  2. After that, press on it and move through the settings.
  3. You need to make some changes in order to open the NAT settings.
  4. This is a kind of NAT which you can use for local services like Xbox Live to make optimum use of it.
  5. Then, you need to go through the box marked as UPnP and then activate it.
  6. This is the best fit for Windows Plug and Play but suited for the network level that permits the router to work. However, it will take more time for a new item on the network to link with the internet properly. For most of the users, this is enough to make the necessary changes in the NAT settings in order to open.
  7. After that, go through the IP address. If you are using port forwarding on how to change NAT settings on the Linksys router, you may require the IP addresses. Also, you need ports that require opening.
  8. To find the IP address of the computer, move to the Start Menu of the Windows and write cmd.exe in the run box without the use of quotes.
  9. Then, write “ipconfig” when the command window opens up
  10. This will provide information about the P.C as well as the IP address.
  11. In most of the cases, the IP address connected to the router will provide the first three number groups.

Settings Hardware in the Router’s DMZ

If activation of UPnP doesn’t resolve the issue of associated with NAT, then the other obvious way is to set the system, gaming console, or the cell phone in order to deviate the safety features of the router. Therefore, you can permit the hardware in order to link directly to the internet. However, this may act vulnerable to outside sources However, we advise you to use this for a gaming console. Moreover, if you perform such thing on your main computer, don’t forget to detach the computer from DMZ. Through this, you can have a better idea on “how to change NAT type on Linksys router?”

Concluding Remarks

This article covers the effective hacks on “how to change NAT type on Linksys router?” By following the above steps, you can easily get rid of the above-mentioned issues. Moreover, you can refer to the user guide to have a quick glance. Apart from this, you can provide your valuable feedback in the comment section.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Must Read

Why Router won’t Connect to Internet?

While using a networking device, the user may encounter various types of issues with it and the router won't connect to internet is one...

How to Update Router Firmware TP-Link?

TP-Link makes some of the best network routers that you can find, with all the features that you might need. That is what which...

How to do Linksys Router Firmware Update?

The firmware is nothing but the router software. If the broadcast network connection is interrupted or running slow, then users often try to change...

How to Block IP Address on Router?

Network devices help users to connect to the high-speed internet connection wirelessly. However, in some situations, unwanted devices and systems start adding on the...

Effective Steps on How to Configure Router?

Your router is the backbone of your home or office network that supports all of your internet needs. Therefore, you need to configure your...