how to do a hard reset on eero pro 6

How to Hard Reset on Eero Pro 6?

We are quite well aware of this brand. Eero Pro 6 is one of the famous home mesh WiFi 6 routers, and it corners 2000 sq. ft. It supports fast speed with direct access to the new 6 GHz band. It is known as the company’s top-end, tri-band WiFi 6 system. Users often don’t know how to hard reset on Eero Pro 6. Well, you are in the right place. Over here, we will discuss how to do a hard reset on Eero Pro 6. But first, we will clean the confusion regarding whether factory reset and hard reset are similar or not. 

Many people have this confusion that factory reset and hard reset are similar. Absolutely not. There is a basic difference between factory reset and hard reset. Simple rebooting of any device is known as a hard reset, and it won’t delete any of your data. 

But, in factory reset, all your data will be deleted from your phone and will again be restored to its original factory settings. 

Methods for How to do a Hard Reset on Eero Pro 6

Resetting Eero Pro 6 can prove to be a helpful troubleshooting step. Though before attempting reset steps, we recommend going for similar yet simpler steps. Like power cycling by unplugging the power cable, waiting 30 sec and plugging back in. 

There are mainly two ways on how to do a hard reset on Eero Pro 6. Either using an app or by hitting the reset button, which is located at the back of the device. In other devices, the reset button might be at the back or at the button. There are mainly two distinct actions, either through soft reset or hard reset. 

Hard Reset 

Hard reset is basically used to clear all network configurations, to clear its session and logs and even to remove Eero from the network. If the Eero has an active internet connection, you can use the Eero application to get the desired result. 

In case you are planning a hard reset in the gateway Eero, then you need to be very sure of it. As it will remove the entire network and even all the settings for that network. If you only want to hard reset one Eero, then it would be better to swap out the Eero gateway for another Eero.

You just have to hold the reset button till you see the red LED flashlight; after that, release it. After a successful reset, you will see a blue LED light which indicates your Eero is ready to set up again. You need to hold the reset button at least for 15 seconds. 

Soft Reset 

The soft reset is also used to clear all network configurations, but it will keep the Eero on the network. It will save the logs and even the advanced settings, like IP reservation etc. In order to soft reset, you need to hold the reset button till you see a yellow LED flash. 

Do this for at least 7 seconds, and after that, release it. Wait for a while and you will observe a solid white with a green outline in the Eero app.

Why do You need to Reboot the Eero?

Now the question comes: how to do a hard reset on Eero Pro 6 and why do you need to reboot. In most cases, it has been seen that the users do not need to reset the Eero. Just by power cycling the device you can easily fix the issue. You can also use the application. 

With the application, you don’t need to unplug individual Eero. Below we have listed a few reasons why to reboot your Eero. In case you face slow speed on your device, you can go for the reboot option. 

  • Go for rebooting your device if there are any issues with other connected devices.
  • If you observe that the connected device is connected to the wrong Eero, then you can solve this issue by rebooting the system. 

How to Reboot Eero and Eero Network?

In case you want to reboot your Eero, then the first thing that you need to do is to go to the home tab. After that, hit the online status button, which is situated at the top center of the screen. Now, you have to hit the Eero that you wish to reboot and then open its Options menu. 

In the Option menu, scroll down and search for the Reset option. Click on the Reset option, and then select Restart Eero. You will find this Restart Eero option on the sub-options available. 

If you don’t know how to do a hard reset on Eero Pro 6 network, then you are in the right place. 

Below we have listed the steps that will help you out:

  • First, you have to open the Eero application, and then go to the Settings option. 
  • After that, you have to scroll down and search for the Advanced option. 
  • In the Advanced option, scroll down and look for the Reset option. It might be at the bottom of the Advanced menu. 
  • Now, in the Reset menu, click on the Restart Network option. And, for confirmation, tap the Restart Network option again. 
  • This will help you to restart your entire Eero network. 

Conclusion… 

So, this was all about how to do a hard reset on Eero Pro 6. We have also discussed some of the basic ways to reboot the Eero network. In case the hard reset is not working and you can’t perform the reset, then it means that the Eero is damaged or broken. The steps for hard reset are well elaborated, hopefully, they will help you out. 

Leave a Reply

Your email address will not be published.