Network devices help users to connect to the high-speed internet connection wirelessly. However, in some situations, unwanted devices and systems start adding on the network devices like routers and cause network speed related issue. Hence, in order to avoid those problems, the user needs to block an IP address from the router. However, to do that they need to follow some simple set of instructions. Now, if you want to know “how to block IP address on Router?” then follow this article. This is because we have provided the best way to do that here. So, without wasting any more time, let’s have a look at them

How to Block IP Address on Router?

To block IP address from router or network device, you need to follow some simple steps. In this section of the article, we have provided those steps for you, have a look at them and try to execute them as instructed:

  1. Open the Router’s Administrative page and enter your credentials.
  2. In the setting page, tap on the Access Control section in order to enter its page.
  3. There you need to click on that box which is present next to the Enable Internet Access Control and then, click on the Deny option for the Default Filter Policy. Now, click on the save option.
  4. After doing that, click on the Setup Wizard option to enter the settings section of the router. There you need to set the Mode selection as the IP Address and then, add the information for Host Description. This will contain the name of that device which is connected with your network and you want to block its access. Then, click on the Next option.

Once you do that, the IP Address of the device will get blocked and it will unable to connect with your network again. Until you unblock the IP address of that device manually.

Conclusion

We hope that our solutions and suggestions will able to help you to settle down your quarries related to router block IP address. However, if you need more information on this topic or any other tech-related stuff then keep following our upcoming articles.