The Superhub 3 IP address will help you to access the router. It is the default IP address and is also unchangeable. All the default IP addresses of routers are private. No one can access it, except you. It will also help you to log in and configure the router with the help of all the network credentials.
After you find the default IP address, look for the login and configuration process. Here are all the methods. In addition to that, you must also try to find out the username and password for logging into Superhub 3.
Finding the Default IP Address
Superhub 3 is designed by Virgin Media, a well-known network device manufacturing organization. You can find the Superhub 3 IP address on the Virgin media label attached to the router. If the default IP address is not present on the label, then surely it will be present in the device’s user manual.
Superhub 3 Login and Configuration Methods
Connect the router to the power supply with the help of the dedicated power cord. After that, plug in the network cable to the WAN port. If you are eager to set up the router wirelessly, then connect any mobile device or laptop via Wi-Fi. Grab an additional Ethernet cable and plug it into the LAN port and desktop computer.
Open a browser on your computer and type the default IP address (192.168.0.1) in the address bar. After pressing the Enter key, you will get the login page. Apply the login ID and password. Click on the “Login” button. The login page will redirect you to the router’s management page.
Observe all the features carefully. For a static internet connection, the network credentials of the internet will be synchronized with the router automatically. Regarding dynamic connection, you need to gather the network credentials. Navigate to the network management or settings tab. Now, select the connection as WPA/WPA2.
Fill up all the blank spaces with the network data. Make sure you enter them correctly; otherwise, a successful network connection will not be possible. Save the changes and close the tab. Furthermore, open the basic network info tab to input the SSID and password. Make sure the SSID is easy to remember. The password must be of various characters to ensure security.
The Dual-Mode of Superhub 3 IP address
The device can act as a hub as well as a router. Most probably, the default mode of the device is the router. If it is so, then it will be easy to configure the device in router mode. If not, then you have to restart or reset the device to the router mode.
Cannot Access the Superhub 3 IP address?
If the existing router IP address doesn’t work, then you will not be able to access the login page. Now, there are several reasons behind that, but the wrong IP address is the most common one. Other possible reasons are corrupted or outdated firmware, malfunctions in the internal settings and more.
In order to fix the issue, you need to reset the device and roll it back to its factory condition. Press and hold the Reset button and hold it for 5 to 8 seconds. All the settings and configurations will be deleted. So, you have to perform the login and configuration process once again.
Configuration of Network Stack, Is it Necessary?
Yes, the configuration of the network stack is necessary because it will identify the properties of the connection. The concept of network stack means manually configuring the network in your system in the absence of the router. Connect the WAN cable directly to the computer. There is no need for a Superhub 3 IP address.
Navigate to the Control Panel/Settings. Click on network connections to find out the LAN properties. TCP/IP V4 connection properties will accept all the network credentials. Apply them and click on OK.
How to Configure the Superhub?
If you want to use a device like a Hub, then the configuration is mandatory. Login with the help of Superhub 3 IP address. When you reach the dashboard, navigate to the advanced settings. In the Business settings option, you will find the cable network settings. Apply the hub’s username and password on the PPP boxes. On clicking the Apply button, the hub will restart and synchronise automatically with the network. You need to wait until the green (ready) light is on. You don’t have to configure the hub, no matter what type of connection (static or dynamic).
Guarding your Entire Setup
A backup option is available to save the entire settings. This option is quite rare amongst network devices. To take backup, you have to log in with the Superhub 3 IP address. When the dashboard appears, navigate to the GUI settings and then to device management handling. When you find the Backup button, click on it, and a pop-up window will appear, asking you to select a backup location. Select any folder and start the process. The backup file will be in .cfg format.