Ricoh Default Login and Configuration Process

Ricoh routers are one of the most popular network devices for seamless internet access. Thus, the Ricoh default login username and password are mandatory. In addition to that, the configuration process follows. The key to the login and configuration methods is the router’s default IP address. 

Before you proceed, make sure that you have a stable internet connection. Moreover, an additional ethernet cable will come in handy for wired configuration. All the methods are given below. Without wasting any time, let’s begin. 

The Login Guide

Google Chrome, Mozilla Firefox, Safari and Internet Explorer (Microsoft Edge). These are some of the browsers that will do the perfect job in accessing the login page. Hopefully, you have found out the router’s default IP address. Place it in the browser and press Enter. The login page will appear. Go through the user manual for the login username and password. If you see that “admin” is written in the place of the login username, then click on the Login button. And, this proves that there is no password pre-defined. 

Setting Up the Router with Network Data

After you reach the device management page with the help of Ricoh default login username and password, check the wireless settings. Regarding the static internet connection, the router will automatically be configured. If you see blank spaces for the network IP address, DNS, subnet mask and others, it means that you are using a dynamic connection. 

Fill the blank spaces with correct network information. Save the current configuration and exit the wireless settings. After that, navigate to the general network settings for assigning the SSID and router password. 

Assigning the SSID and Ricoh Password

To safeguard the router, assigning a password is mandatory. Furthermore, for correct identification, the SSID will play an important role. The SSID must be unique from all the devices. The password must be within 16 characters, with English uppercase and lowercase letters, special symbols and white spaces. 

Facing Trouble with the Login Username and Password?

Here are the default login usernames and passwords that might come in handy. If you cannot log in with the Ricoh default login ID, try one of the following:

  • admin- (blank)
  • admin- password
  • (blank)- password
  • (blank)- sysadm
  • admin- admin
  • admin- 
  • (blank)- (blank)
  • admin- no password
  • (blank)- (blank)
  • admin- no password
  • sysadmin- password
  • admin- odim
  • Supervisor- (blank)
  • (blank)- 000000
  • admin- 420008
  • sisadm- password
  • admin- sem senha

Default Ricoh IP Address

If the dedicated router’s IP address doesn’t work, you can try all the alternative IPs. They are given below:


After trying one of these default IP addresses, you might not still be able to access the login page. Surely there are some issues. Let’s head on to the next portion to resolve any possible problems. 

Fixing the Common Issues

As per the user’s statement, malware in your system can prevent the router from functioning properly. Furthermore, corrupted or outdated firmware, wrong default IP addresses can result in inaccessible Ricoh default login pages. Scan the system with antivirus and eliminate the malware. 

After that, navigate to the router’s management page and check the current firmware version. For verification, check the Ricoh official website for the latest firmware update. Follow the step by step instructions and update the firmware. Lastly, you can reset the router with the help of the dedicated Reset button. It has a greater chance of eliminating all the issues.

Details of Ports used by Ricoh Router

Hopefully, if you perform all the above-mentioned steps, you can easily access the internet. Have you ever thought about the functions behind the ports of the router? There are three types of Unified Communication System (UCS) methods available with the Ricoh default login username and password. 

Ricoh UCP Communication 

It is the communication method that comes without a proxy in the user’s environment. As usual, the source will be the router which is the UCS device. The data packets transfer and reach the main UCS data centre. The TCP ports are 80, 443, 17990, 17992. The UDP ports are 50000 and 65535. 

The TCP443 Port Communication

This port communication is outbound and safeguarded by the firewall. You can only surf the internet within the restricted limit. The source device is the router itself that transfers the data to the main UCS data centre. And, the TCP ports are 80 and 443. 

The TCP Proxy Communication

As the heading states, the user environment is regulated by the proxy server. Similarly, the source is the same as the proxy server. With the help of the UCS data centre destination, the router uses the 80 and 443 TCP. 

Frequently Asked Questions:

How do I log into my Ricoh printer admin?

Open your web browser. Enter “http://(machine’s IP address or host name)/” in the address bar. 
[Administrator Login] is the link to use. dialogue window appears, prompting you to enter your user name and password.

How do I reset my Ricoh admin password?

For the administrator you want to reset, press [Change]. For “Login Password,” press [Change]. Press [OK] after entering the login password. For confirmation, enter the login password once moreand then press [OK].

What is the default password for Ricoh Web Image Monitor?

Enter Ricoh web image monitor default username and password. Click [OK[ after the username and password. If this is your first visit, use the username “admin” and leave the password field blank. 
Taylor Green
Taylor Green
Articles: 276