It is not an everyday occurrence that a router has to be connected, but it is necessary when a network-wide problem needs to be addressed, or any changes have to be made network such as setting up port forwarding rules, configuring firmware updates, etc.
To access router settings as an admin, knowing the router’s IP address and administrative user’s password along with the username is a necessity.
Steps to Access Router Settings as an Administrator
If while accessing the router, you encounter problems or if you do not know or looking for ways on how to access router, you are at the best place. A few of the most natural steps on how to access router settings as an admin are as follows:
- Verify that the computer is connected to the router via an Ethernet cable or wireless connection.
- Know the IP address of the router. Most Routers are manufactured to use a default address like 192.168.0.1, 192.168.1.1 or 192.168.2.1.
- Open a web browser such as Microsoft Edge, Internet Explorer, Google Chrome or Firefox from your computer and request a connection to the router using its IP address.
- Now, you need to enter the administrative login details to authenticate and also to access the admin settings.
Problems while accessing Router Settings
Frequently users complain about encountering several severe issues while accessing their router. Therefore, have a look at a few of the glitches that create difficulties for a user to work smoothly with their routers.
Ethernet Connection Problem- You may face issues while accessing the router settings due to an Ethernet connection error. The cables might be disconnected or loose, eventually causing error connecting to a router.
Faulty Network Card Driver- An incorrect or corrupt network card driver can also create issues with the router. If the driver is malfunctioning, you can face trouble in accessing the router.
Cables Ports Are Not Working- The cable ports of the router which you are using might be faulty or might start to malfunction. Hence, before changing the router settings, you need to ensure that the ports or the router are in good condition.
Third-party Antivirus Software- If any third party antivirus software is installed in your device, it can also cause network issues.
Solutions to the Issues faced during Router Settings
Every issue have solutions to resolve the problems easily. If you are looking for ways on how to access the router, you are at the best place. Here I have mentioned a few of the easy yet effective methods by which you can access the router instantly.
Solution 1 – Try Different Ports on the Router
The ports that you are using in your router might be broken or corrupted, hence the router fails to connect. You need to unplug the cable from the port and then again plug it into a different port and check if the problem you are encountering with your router resolves.
Solution 2 – Check the Ethernet Cables
However, you can also check if the Ethernet cables are working correctly. A disconnected, broken, damaged or a loose cable might prevent you from accessing the router. Therefore, you need to check the cables so that they are connected correctly.
Solution 3 – Update the Network Card Driver
If the ports of the router are not faulty, you can try this procedure. You might face issues on accessing the router settings because of a corrupt network card driver. Updating often solves the bugs thereby helping the user to work properly. Hence, to resolve the error, you need to update the network card driver.
Solution 4 – Turn off any Antivirus or Firewall Temporarily
To check whether the factor is causing the issue, temporarily disable the third party antivirus. Reboot the system and now check whether the problem persists.
Solution 5 – Ensure to Enable Ethernet
After following the above-stated solutions, if the problem fails to resolve, check if the Ethernet is disabled. If not, follow the following steps mentioned below to do the same.
- First, you have to press the Windows key and R at the same time to open a Run dialog box.
- Now, type devmgmt.msc in the Run dialog box and then click on the OK button to open the Device Manager window.
- In the Device Manager, you need to expand the Network adapters category.
- Next to the Ethernet card device name, if you find a computer icon with an arrow, it will detect that the Ethernet has been disabled.
Finally, you should change your router’s username and password from their default values by reading the RouterGuide article. This secures your router so that you can access the router settings. Just remember the new credentials to avoid having to reset the router to make any changes in the future.