For Support, Call Us Now :
How To Configure And Fix Sign-in Issues | Zyxel Router Login
Zyxel router is the latest dual-band wireless device that utilizes the network protocol of the IEEE 802.11ac band. It delivers you a fast and reliable wireless connection to all the WiFi-enabled devices.
This device also helps you to stream full HD and Ultra HD videos without shuttering or buffering problems. But, in order to configure the wireless device properly, you need to access the Zyxel router login page.
Here, we are going to discuss the necessary steps to configure your Zyxel router. We will also elaborate on the login errors and their possible solutions.
How to Log into Zyxel Router?
Let’s take a look at the entire procedure to configure and then log in to the router. But before that, you must locate the Zyxel router’s control panel where the settings of the network device are stored. Now follow the steps that are given below.
Connect to Zyxel Router Webpage
Before setting up your router, you must connect the device to your computer wirelessly or with the help of an Ethernet cable. Now turn on your router and your computer. Also, make sure that the cable is in perfect condition and all the LED lights of your router are working properly.
Now look for the router’s IP address that is written at the backside of the device. The IP address is “192.168.1.1”. Open your web browser and type the address in the URL bar and press Enter.
Enter User ID and Password
When the front end of the web page loads successfully, you need to type the login ID and password. The default ID and password are “admin” and “1234” respectively for this router.
After writing the login credentials, click on the “Log in” button. The router web interface will now appear on your screen.
In order to configure your Zyxel router, go to the “Wireless Network Settings” and type a new name for your device. You can also call it “SSID”. Now access the WAN settings and you need to set the process of encapsulation to “PPPOE”. Then you must create a strong password to ensure your network and the router are secured.
After creating the password, go to the “Wizard” section and you will see three options present there. Click on the radio button beside “Go Advanced setup” and then hit the “Apply” button. After that, the web-based configuration page will open. So, select “Menu” that is present on the left side of the screen and then click on “Network”.
Before selecting the network menu, verify and try to match the following items in the wizard.
- ADSL Mode= Auto Sync-Up
- Annex Type= ANNEX A/L
- Mode= Routing
- Encapsulation= PPPoE
- User Name= DSL User Name
- Password= DSL Password
- Service Name= Magnet
- Multiplex= LLC
- VPI= 8
- VCI= 35
- Obtain an IP Address Automatically
- Keep Alive
Now select the LAN option and write all the necessary credentials like the IP address of your network, Pool Size, Remote DHCP Server, Primary and Secondary DNS, and others. Now set the Wireless network to “Enable”.
On the left-hand side menu, access the NAT section and you will see a checkbox named “Active network Address Translation”. So, tick the checkbox and click on the radio button next to “SUA Only”.
Thereafter, click on the “Apply” button and another page will appear. Here, disable both Firewall and SPI, then go to the Network to select Wireless LAN settings. Also, enable the WLAN and choose “Advanced Setup”. Now set the correct value to 1492.
As the Zyxel router setup process is over, restart your device to save these changes. Now you can connect to the Internet and modify router settings accordingly.
What to do When Zyxel Router Stops Responding Post Configuration?
According to our analysis, we came to know that most of the users are facing this problem. So if you are one of them, you need to fix it as soon as possible. The underlying reason might include network congestion, freezing router hardware, and other issues.
But, most of these errors can be resolved by resetting your Zyxel router. The steps are given below.
Fix Configuration Error with Router Reset
So, you need to reset your router and roll it back to its factory condition to troubleshoot the configuration issue. Hence, locate the reset button, which might be present at the backside of the device.
Then turn on your router and take a straightened paper clip or pen to press and hold the reset button for 30 seconds.
Don’t release the button but, unplug the power supply from the router at the very same moment. Keep holding the button for another 30 seconds after plugging the device off. Now turn on the device and continue holding the button for another 30 seconds.
Now release the button and wait for the device to start up. This entire operation is known as the 30-30-30 reset procedure. We hope that this operation will solve the situation when your router is not responding after configuration.
Note: The time spans given above are very crucial when it comes to applying the 30-30-30 reset technique. If you somehow don’t follow the exact time span, then your router might malfunction. So we advise you to maintain the time span when you reset the Zyxel router.